3 documents for scanning, Paper size, Conditions – Fujitsu Ricoh Fujitsu SP-1425 Image Scanner User Manual

Page 35: Documents for scanning, Paper size conditions, Contents index, Appendix glossary introduction top

Advertising
background image

Contents

Index

Chapter 2 How to Load Documents

Appendix

Glossary

Introduction

TOP

35

How to Use the
Operator Panel

Various Ways to
Scan

Daily Care

Troubleshooting

Operational
Settings

Replacing the
Consumables

Scanner
Overview

How to Load
Documents

Paper Size

The following paper sizes can be scanned:

*1: Depending on the application or the scan settings for the scanner

driver, there may be insufficient memory to perform scanning.
When a long page is scanned, a maximum length of 3,048 mm (120
in.) can be scanned with a scanning resolution of 200 dpi or lower.

Conditions

The following documents can be scanned with the ADF. To
scan documents other than the following, use the flatbed.

Paper Type

The following paper types are recommended:

Wood-free paper

Wood-containing paper

PPC paper (recycled)

When using paper types other than the above, make sure to test with
the same type of paper first to check if the document can be scanned.

Paper Weight (Thickness)

The following paper weights can be used:

52 to 127g/m

2

(14.0 to 34.3 lb)

2.3 Documents for Scanning

ADF

Maximum size (width × length)
- A4 (portrait) (210 × 297 mm/8.3 × 11.7 in.)
- Legal (8.5 × 14 in.)
- Long Page (*1)

(216 × 863 mm/8.5 × 34 in., 216 × 3,048 mm/
8.5 ×120 in.)

Minimum size (width × length)
114 × 140 mm (4.49 × 5.51 in.)

Flatbed

Maximum size (width × length)
216 × 297 mm (8.50 × 11.69 in.)

Minimum size (width × length)
25.4 × 25.4 mm (1.0 × 1.0 in.)

Advertising