Lucent Technologies MERLIN LEGEND 6 - Manual (Page 127)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
System Components
Page 3-45 Adjuncts
3
Table 3–5. Continued
Equipment Description
Dial Dictation:
A device that requires contact closure
can be used on LS/GS line jack only
with adapter. Can be connected to:
LS or GS/LS trunk jack
008 OPT, 016 (Release 4.0 and later), or 012 T/R
extension jack
MFM and MLX extension jack
GPA and analog extension jack
Cannot be connected to a QCC.
Requires adapter to provide 48 VDC.
Direct Station Selector (DSS):
A maximum of two DSSs per operator
console; 329A power supply required
for console with two DSSs. Connects to DSS jack on MLX operator console
only.
Door Phone:
Use system programming to designate
phone to ring. Connects to loop-start line/trunk jack.
Fax:
Must have touch-tone dialing if
connected by MFM; rotary or touch-
tone dialing can be used on T/R port.
Industry-standard analog interface. Can be connected to:
008 OPT, 016 (Release 4.0 and later), or 012 T/R
extension jack
MFM and MLX extension jack
With MFM, device originates and receives calls
independently of phone.
Cannot be connected to a QCC.
Group Calling Delay
Announcements:
Industry-standard devices that provide
disconnect and announcement
features. Each calling group can have
10 primary delay announcement
devices and 1 secondary device
*
.
Devices can provide delay
announcements for more than one
group.
Can be connected to:
008 OPT, 016 (Release 4.0 and later), or 012 T/R
extension jack
MLX telephone with MFM and MLX extension
jack (with MFM, device originates and receives
calls independently of phone)
Analog multiline telephone with GPA and analog
extension jack
Cannot be connected to a QCC.
Hands-Free Unit Connects to analog multiline phones.
Headsets and Adapters Connect to MLX/analog multiline phones.
Continued on next page