Lucent Technologies MERLIN LEGEND 6 - Manual (Page 326)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Learning More
Page 7-2 Guides
7
■ System Reference Guides. Designed to help system managers and
Lucent Technologies personnel in planning, programming, and managing
the system. These references provide detailed information about system
components, features, and capabilities, as well as procedures for
programming all aspects of the system.
■ Special Reference Guide. For Release 6.0 and later systems
(Hybrid/PBX mode only), the
Network Reference provides a general
grounding in networks made up of linked MERLIN LEGEND
Communications Systems and/or DEFINITY Enterprise Communications
Server/ProLogix Solutions systems. In addition, it provides instructions to
help you set up, optimize, and maintain networked systems. It also
describes feature interactions, required system programming, and
supported facilities for such private network features as tandem switching
and support for non-local extensions. Networking information is not
included in
System Manager’s Guide.
■ User and Operator Guides. Designed for the users of telephones or
system features. Each of these manuals describes the use and features of
specific telephones or operator consoles.
This section provides ordering information and then descriptions of the system
reference guides and of the user and operator guides.
Ordering and Availability 7
For information about ordering any of the printed materials, see “Related
Documents” on page xlii in “About This Book,” at the beginning of this book.
System Reference Guides 7
There are two general system reference guides that you may need to consult as
part of your system manager function:
■ The Feature Reference contains detailed information about features and
summary descriptions of applications.
■ System Programming includes detailed, step-by-step procedures to
program the system.
The Feature Reference and System Programming are essential if you modify the
system or add new users and new features.
NOTE:
The Equipment and Operations Reference does not include information
about hardware that was introduced after Release 3.0 of the system.
Consult Chapter 3 of this guide, “System Components,” for general
descriptions. For more detailed information about newer hardware