Lucent Technologies MERLIN LEGEND 6 - Manual (Page 268)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-38 Setting System Date and/or Time
6
NOTE:
The Extension Information report incorrectly lists MLX-16DP telephones as
MLX-28D telephones. In releases prior to 5.0, MLX-5D and MLX-5
telephones are listed as MLX-10D and MLX-10 telephones, respectively. If
you have MLX-16DP, MLX-5D, and MLX-5 telephones in your system,
keep a separate log of the extension numbers. In Release 5.0 and later
systems, MLX-5 and MLX-5D telephones are correctly identified in the
report.
Setting System Date and/or Time 6
Use this procedure to change the system date and/or time. These must be set
correctly. System time affects the functioning of several system features and
applications, including Automatic Backup, Night Service, SMDR reports,
standalone auto attendant systems, voice mail, and Reminder Service.
NOTE:
Be sure to change the system time appropriately when Daylight Savings
Time starts and when it ends.
Planning Guidelines 6
If you change the system time while the system is in Night Service mode, Night
Service is deactivated and must be manually reactivated.
If you have installed applications such as Intuity AUDIX, you may need to set the
time in the applications software whenever you reset the system time.
PC Procedures To print trunk information:

→
Е
→
И
→
Select trunk type
→
Ç
To print extension information:

→
Å
→

→

→
Type ext. no.
→
7
→
Ç
To print all other reports:

→
Å
→
Select report
→
Ç
To save report on disk:

→
Å
→
Select report
→

→
select BPUPÃAGPQQ`
from below console simulation screen
→

To view report:
` +