Lucent Technologies MERLIN LEGEND 6 - Manual (Page 263)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-33 Centralized Telephone Programming
6
Console/Display Instructions Additional Information PC
!  Specify the number of the extension to which you want to copy programmed
features or SA or ICOM buttons.
! 
Either continue to copy line assignments and programmed features from the
copy extension shown to another extension or go to Step
7 .
!  Return to the Centralized Programming menu.
Select ([LW .
Ç
!  Save your entry.
Select (QWHU . 
! 
Return to the Centralized Programming menu.
Select ([LW . Ç
Copying Line/Trunk Button Assignments 6
Use this procedure to copy outside line/trunk button assignments, pool dial-out
code restrictions (Hybrid/PBX only), and Night Service information (for operator
positions only). You can copy from one extension to another or to a block of
extensions with identical requirements. Use system programming for this
procedure.
8‚ƒ’Ãr‘‡r†v‚ÃYYYYǂ) YYYY = extension entered in Step 2
@‡r Ãr‘‡r†v‚
OOOO
7hpx†ƒhpr Ir‘‡
@‘v‡ @‡r
Dial or type [ OOOO ].
Ã
Select (QWHU ( ) to continue copying
line assignments from the extension
currently displayed on Line 1 to additional
extensions.
Select
Ir‘‡ (  ) if the extension
numbers to be copied to are sequential.
Select
@‡r (

) after completing
programming.
Return to Step
4 to continue
programming. The extension to be copied
from is displayed on Line 1.