Lucent Technologies MERLIN LEGEND 6 - Manual (Page 273)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-43 Moving an Extension
6
instructions in “Analog Multiline Telephones with Voice Announce to Busy”
in the “Telephones” section of
System Programming, Chapter 3, or the
instructions in “Data Features” in Chapter 4 of System Programming.
o
Program the features following the instructions for each feature in “Optional
Telephone Features,” “Optional Group Features,” and “System Features” in
System Programming, Chapter 3, or in Chapter 5, “Centralized Telephone
Programming” of
System Programming.
o
When you have finished, file the form(s) with the rest of the planning forms.
Programming Instructions 6
See the appropriate procedures in System Programming as noted in the task list
above.
Moving an Extension 6
Use this procedure to move an extension in your system.
Planning Guidelines 6
There are three ways to move an extension:
■ Call Lucent Technologies at 1 800 247-7000. They can arrange for a
Lucent Technologies technician to do it for you at your site.
■ If you have remote maintenance and administration as part of your
maintenance contract, call the Lucent Technologies Helpline at
1 800 628-2888. They can determine whether it can be done remotely. If
possible, they can do it remotely for you. If not (for example, if additional
ports are required), you can call the 1 800 247-7000 number for service. If
you do not have this coverage in your contract and are interested in adding
it, contact your Lucent Technologies representative.
■ Follow the procedure in this section.
If the extension is not wired or is wired but not connected to the system, or if you
are not sure, you must call Lucent Technologies at 1 800 247-7000 to arrange for
this to be checked or completed.
NOTE:
Consultation charges may apply when you call Lucent Technologies, and
your organization may be charged for service.