Lucent Technologies MERLIN LEGEND 6 User Manual

Page 427

Advertising
background image

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide

555-660-118

Issue 1

February 1998

Glossary

Page GL-3

B

Automated
Attendant

IS II/III, MERLIN LEGEND MAIL, and Lucent Technologies
Attendant application that automatically answers incoming
calls with a recorded announcement and directs callers to a
department, an extension, or the system operator.

Automated
Document Delivery
System

See

ADDS.

automatic
immediate cycling

Process that occurs in private network when all available
routes for a call specify systems with matching

switch

identifiers. The call is routed from the originating system to
the destination system and back to the originating system
in a continuous loop.

Switch identifiers labelling systems

must be unique across a network.

Automatic Line
Selection

See

ALS.

Automatic Number
Identification

See

ANI.

automatic
ringdown tie-trunk

See

automatic-start tie trunk.

Automatic Route
Selection

See

ARS.

automatic-start tie
trunk

Tie trunk on which incoming calls are routed to an operator
or other designated destination without a start signal, as
soon as the trunk is seized; the destination is specified
during programming. Also called “automatic ringdown” or
“auto-in” tie trunk.

auxiliary power
unit

Device that provides additional power to the system.

B8ZS

(bipolar 8 zero substitution) Line-coding format that
encodes a string of eight zeros in a unique binary sequence
to detect bipolar violations.

backup

Procedure for saving a copy of system programming onto a
floppy disk or

memory card. See also restore.

bandwidth

Difference, expressed in hertz, between the highest and
lowest frequencies in a range that determines channel
capacity.

barrier code

Password used to limit access to the

Remote Access

feature of the system. In a

private network, it is especially

important that barrier codes be required for all types of
remote access.

basic carrier

Hardware that holds and connects the

processor module,

power supply module, and up to five other modules in the
system. See also

expansion carrier.

Advertising