Extension, Programming, Feature code – Lucent Technologies MERLIN LEGEND 6 User Manual

Page 436

Advertising
background image

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide

555-660-118

Issue 1

February 1998

Glossary

Page GL-12

F

extended
superframe format

See

ESF.

extension

An endpoint on the internal side of the communications
system. An extension can be a telephone with or without an
adjunct. Also called “station.” See also

data workstation.

extension jack

An analog, digital, or

tip/ring physical interface on a module

in the control unit for connecting a telephone or other
device to the system. Also called “station jack.”

extension
programming

Programming performed at an extension to customize
telephones for personal needs; users can program features
on buttons, set the telephone ringing pattern, and so on.
See also

centralized telephone programming and system

programming.

facility

Equipment (often a

line/trunk) constituting a

telecommunications path between the system and the
telephone company central office (

CO).

Facility Restriction
Level

See

FRL.

factory setting

Default state of a device or feature when an optional setting
is not programmed by the user or system manager.

fax

(facsimile) Scanning and transmission of a graphic image
over a telecommunications facility, or the resulting
reproduced image, or the machine that does the scanning
and transmitting.

Fax Attendant
System

Fax handling and processing application available with
AUDIX Voice Power.

FCC

(Federal Communications Commission)

feature

Function or service provided by the system.

feature code

Code entered on a dialpad to activate a feature.

feature module

Prior to Release 3.0, a circuit pack inserted into the
processor module, used to provide system features and
replaced when the system is upgraded.

Feature screen

Display screen on MLX display telephones; provides quick
access to commonly used features.

ferrite core

Attachment to the AC power cord and ground wire of the
carrier power supply for compliance with FCC, part 15
requirements.

Flash ROM

Beginning with Release 3.0, a type of read-only memory
provided on the

processor module, used to supply system

features.

foil shield

Copper foil sheet (for power units) used to prevent
excessive noise on the module.

Advertising