Lucent Technologies MERLIN LEGEND 6 - Manual (Page 368)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Troubleshooting the System
Page 8-22 Reminder Messages Received with the Wrong Time
8
What to do: Use centralized telephone programming to check the programming
for the phone’s buttons.
■ If the programming is incorrect, reprogram it. Try to use a programmed
button. If the button works, you have solved the problem. If not, go to
Possible Cause 2.
■ If the programming is correct, go to Possible Cause 2.
Possible Cause 2: The telephone may be defective.
What to do: Test the telephone by replacing it with a similar telephone that you
know is working properly. Program the buttons as appropriate.
■ If the programmed button works properly on the replacement telephone,
then replace it with the original telephone and check again. If the
programmed button on the original telephone still fails, then the original
telephone may be defective. Call the Lucent Technologies Helpline at
1 800 628-2888 (consultation charges may apply).
■ If the programmed button on the replacement telephone fails, there may be
a problem with the system wiring or the control unit. Call the Lucent
Technologies Helpline at 1 800 628-2888 (consultation charges may
apply).
Reminder Messages
Received with the Wrong Time
8
NOTE:
Be sure to change the system time appropriately when Daylight Savings
Time starts and when it ends. System time affects the functioning of
several system features, including Automatic Backup, Night Service,
Station Message Detail Recording (SMDR) reports, standalone auto
attendant systems, voice mail, and Reminder Service.
Possible Cause: The system time may be set incorrectly.
What to do: At the programming console or any MLX display telephone, check
the system time. If the time is correct, call the Lucent Technologies Helpline at
1 800 628-2888 (consultation charges may apply).