Lucent Technologies MERLIN LEGEND 6 - Manual (Page 248)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-18 Programming from a PC with SPM
6
! 
Make a selection.
Exiting System Programming 6
Use the information in Table 6–5 to return to the System Programming menu, the
main menu (Menu Mode screen), or the Home screen.
Table 6–5. Exiting System Programming
Programming from a PC with SPM 6
The System Programming and Maintenance (SPM) software package offers an
alternative method of programming using a PC. This method frees the system
programming console for other uses and also provides additional functions. Using
a PC with SPM enables you and qualified service personnel to program the
system from off-site locations.
SPM runs on a DOS-based PC as a standalone package, or on a UNIX System
platform with Integrated Solution II or Integrated Solution III (IS II/III, no longer
available).
YYYYÃYYYYÃ YYYYÃYYYY 2SHUDWRU = Position extension numbers
@‘v‡ Select ([LW
T’†‡r€ÃQ ‚t h€€vt)ГГГГ3 Press the button or function key next to
HhxrÃhÆryrp‡v‚ your selection.
T’†‡r€ @‘‡r†v‚†
T’†Srˆ€ir Pƒ‡v‚†
Pƒr h‡‚ Uhiyr†
Gvr†U ˆx† 6ˆ‘@„ˆvƒ
@‘v‡ Ivtu‡T ‰pr
To return to: On the console press: On the PC press:
Previous menu
(or, in some
cases go to the
next item to
program) ([LW Ç
Main menu Menu

Normal call
handling Home '