Lucent Technologies MERLIN LEGEND 6 - Manual (Page 410)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
System Capacities
Page C-2
C
the equipment (for example, a fax or an answering machine) connected to the
MFM.
Similarly, although the 100D module has only one jack, it can serve up to 24
endpoints (emulated, T1 digital, or PRI facilities). Thus, you can configure the
system to connect up to 80 lines/trunks and 255 extension endpoints, a total of
335 endpoints.
NOTE:
The system has a time-slot capacity of 216. If more than 216 endpoints are
in use at the same time, blocking can occur.
Table C–1 lists the hardware and software capacities of the system. Some
constraining factors appear with a checkmark (  ) and are explained at the end of
the table.
If you are planning to expand your system, contact your Lucent Technologies
representative for additional considerations.
Table C–1. Hardware and Software Capacities
Limit Constraining Factor
Allowed/Disallowed Lists
Number of lists
Entries per list
Digits per entry 8
10
7
Automatic Route Selection
Number of ARS tables
Subpatterns per table
Routes per subpattern
Entries per table
Entries across all tables
Default tables 16
2
6
100
1,600
4
Callback
Number of calls in queue 64
Continued on next page