Lucent Technologies MERLIN LEGEND 6 - Manual (Page 239)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-9 Introduction to System Programming
6
The system programming hierarchy, included in Appendix B of System
Programming, details the sequence of screens you work with when you select the
system programming options.
Table 6–2. System Programming Menu Options
Saving Entries and Moving among Screens 6
At the bottom of each screen, one or more screen keys with functions allow you to
change or save your entry or return to a previous screen. Various combinations of
these keys appear on each programming screen.
Figure 6–5 shows the QCC
Priority screen with a typical display of screen keys.
Option Description
T’†‡r€ Set system operating conditions.
T’†Srˆ€ir Select the system numbering plan and/or reassign extension numbers
with 1- to 4-digit numbers.
Pƒr h‡‚ Assign or remove operator positions and program operator features
(such as Operator Hold Timer or QCC options).
Gvr†U ˆx† Program line/trunk options.
@‘‡r†v‚† Program extensions (for example, with restrictions and lines).
Pƒ‡v‚†
Program systemwide settings (for example, Transfer Return).
Uhiyr†Ã Program features that require entering information in a table (such as
Allowed Lists and Disallowed Lists).
6ˆ‘@„ˆvƒ Program auxiliary equipment connected to the system (for example,
loudspeaker paging and fax machines).
Ivtu‡T ‰pr Program Night Service features.
Ghiryvt Program the labels shown on telephone displays (for example, entries
in the System Directory and Posted Messages).
9h‡hà Specify extensions that need voice and data capability.
Q v‡ Print system programming reports (for example, system configuration
and extension assignments).
8‡ yÃQ ‚t Perform centralized telephone programming (assign features to specific
buttons on telephones).
Ghtˆhtr Select the language of the system for MLX display telephones, SMDR
reports, and print reports.