Hybrid/pbx mode and – Lucent Technologies MERLIN LEGEND 6 User Manual

Page 438

Advertising
background image

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide

555-660-118

Issue 1

February 1998

Glossary

Page GL-14

H

I

Hands Free
Answer on
Intercom

See

HFAI.

hands-free unit

See

HFU.

headset

Lightweight earpiece and microphone used for hands-free
telephone operation.

HFAI

(Hands Free Answer on Intercom) Feature that allows a
user to answer a voice-announced call.

HFU

(Hands-Free Unit) Unit for analog multiline telephones that
allows users to make and receive calls on the
speakerphone without using the handset.

Home screen

Display normally shown on an MLX display telephone;
shows time, date, and call information, and shows when
some features are in use.

host

Telephone company or other switch providing features and
services to the system users, usually when the system is
operating in

Behind Switch mode.

hub system

In

private network that is arranged in a star configuration,

the communications system through which all calls across
the network pass.

Hybrid/PBX mode

One of three modes of system operation, in which the
system uses line/trunk

pools and ARS in addition to

personal lines. Provides a single interface (SA buttons) to
users for both internal and external calling. See also

Behind

Switch mode and Key mode.

ICLID

(Incoming Call Line Identification) See

Caller ID.

ICOM buttons

(intercom buttons) Telephone buttons that provide access
to inside system lines for calling other extensions or
receiving calls from them.

immediate-start
tie trunk

Tie trunk on which no start signal is necessary; dialing can
begin immediately after the trunk is seized.

in-band signaling

See

robbed-bit signaling.

inside dial tone

A tone users hear when they are off-hook on an

SA or

ICOM button.

Inspect screen

Display screen on an MLX display telephone that allows the
user to preview incoming calls and see a list of the features
programmed on line buttons.

Advertising