Lucent Technologies MERLIN LEGEND 6 - Manual (Page 269)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-39 Backing Up the System
6
Valid Entries
For date:
Month: 01 to 12
Day: 01 to 31
Year: 00 to 99
For time: 0000 to 2359
Task List: Setting System Date and/or Time 6
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for “Set System Date” or
“Set System Time” in the “Basic System Operating Conditions” section in
Chapter 3 of
System Programming, or the summary programming
instructions below.
Programming Instructions 6
Backing Up the System 6
Use this procedure to make a copy of your customized system data. You should
create a backup after each system upgrade, service technician visit, or major
system reconfiguration.
The backup does not copy any application data. For information about application
backup, see the documentation for the application.
The backup is performed using the Translation memory card (white label).
For information about the Restore procedure, see Chapter 4, “Advanced
Programming Procedures,” in
System Programming.
Planning Guidelines 6
While the backup is in progress, you cannot access any programming functions.
If any type of programming is taking place at another extension when you begin
the backup procedure, the backup is canceled and the number of the first busy
Console Procedure T’†‡r€
→
9h‡rà or Uv€r
→
Drop
→
Dial current date or
time
→
@‡r
→
@‘v‡
PC Procedure
Г
→
Й7
or

→
U
+
I
→
Type current date or
time
→

→
З