Lucent Technologies MERLIN LEGEND 6 - Manual (Page 259)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-29 Centralized Telephone Programming
6
Console/Display Instructions Additional Information PC
!  Select the line button where you want to assign the feature.
If you are programming a telephone with more than 20 line buttons, use QhtrÃ! (
É
)
to select the additional buttons. See Appendix E in System Programming for button
diagrams of all telephones.
! 
Program the feature(s).
When the line button is programmed, the system automatically returns to the display
in Step
5 . (Note that this is a sample screen for a line button; other screens may have
a different first line.)
!  Repeat Steps 5 and 6 for each line button you want to program for the
extension, or press the Home button to return to the Centralized Programming
menu.
Copying Feature and SA/ICOM Buttons 6
You can use the Copy Extension feature to copy an extension’s programmed
buttons (with some exceptions) to one or more extensions. Program the features
individually on an extension to create a template that can then be copied to other
extensions in the system.
Only extensions of the same type can be copied to one another (that is, analog to
analog, and MLX to MLX) because the two telephones have different button
layouts. For a system that has both analog and MLX telephone types, you need
two templates: one for analog and one for MLX.
Tryrp‡Ã7ˆ‡‡‚) YYYY = extension entered in Step 2
@‘‡r†v‚ÃQ ‚t h€ÃÃÃÃYYYY
ÃÃÃÃÃQhtrÃ
ÃÃÃÃÃQhtrÃ!
Press the line button or function key that
corresponds to your selection.
Ã
T’†ÃQ ‚t h€
 = current programming of button
Q r††ÃCPH@Г‡‚Г@‘v‡ selected in Step (Line YYY , voice,
9ryr‡r ÃÃÃÃÃQhtrà feature, or blank)
ÃÃÃÃÃQhtrÃ! Dial or type the programming code:
Ã
[ OOO ] or select Gv†‡ÃArh‡ˆ r ( ) to
display a list of features you can select
from.
T’†ÃQ ‚t h€ Gv†‡Arh‡ˆ r