Important safety instructions, Important safety instructions 0 – Lucent Technologies MERLIN LEGEND 6 User Manual
Page 15
MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
IMPORTANT SAFETY INSTRUCTIONS
Page xv
IMPORTANT SAFETY INSTRUCTIONS
0
When installing telephone equipment, always follow basic safety precautions to
reduce the risk of fire, electrical shock, and injury to persons, including:
■
Read and understand all instructions.
■
Follow all warnings and instructions marked on or packed with the product.
■
Never install telephone wiring during a lightning storm.
■
Never install a telephone jack in a wet location unless the jack is
specifically designed for wet locations.
■
Never touch uninsulated telephone wires or terminals unless the telephone
wiring has been disconnected at the network interface.
■
Use caution when installing or modifying telephone lines.
■
Use only Lucent Technologies-manufactured MERLIN LEGEND
Communications System circuit modules, carrier assemblies, and power
units in the MERLIN LEGEND Communications System control unit.
■
Use only Lucent Technologies-recommended/approved MERLIN LEGEND
Communications System accessories.
■
If equipment connected to the analog extension modules (008, 408, 408
GS/LS) or to the MLX telephone modules (008 MLX, 408 GS/LS-MLX) is to
be used for in-range out-of-building (IROB) applications, IROB protectors
are required.
■
Do not install this product near water, for example, in a wet basement
location.
■
Do not overload wall outlets, as this can result in the risk of fire or electrical
shock.
■
The MERLIN LEGEND Communications System is equipped with a 3-wire
grounding-type plug with a third (grounding) pin. This plug will fit only into a
grounding-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact an electrician to replace the obsolete
outlet. Do not defeat the safety purpose of the grounding plug.
■
The MERLIN LEGEND Communications System requires a supplementary
ground.
The exclamation point in an equilateral triangle is
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.