Lucent Technologies MERLIN LEGEND 6 - Manual (Page 29)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Prior Releases: Features and Enhancements
Page xxix Release 4.1 Enhancements
Release 4.1 Enhancements 0
Release 4.1 includes all Release 4.0 functionality, plus the enhancements listed
below. There are no hardware changes in Release 4.1.
Coverage Timers Programmed for
Individual Extensions
0
Beginning with Release 4.1, coverage timers, which control the duration of the
delay before calls are sent to each level of coverage, are changed as follows:
■ The Group Coverage Ring Delay (1–9 rings) is programmed on individual
extensions and replaces the Coverage Delay Interval programmed
systemwide in previous releases.
■ The Primary Cover Ring Delay (1–6 rings) and Secondary Cover Ring
Delay (1–6 rings), programmed on individual extensions, replace the Delay
Ring Interval programmed systemwide in previous releases.
These enhancements allow the system manager to customize coverage call
delivery to match individual extensions’ call-handling requirements.
Night Service with Coverage Control 0
Beginning with Release 4.1, a system manager can enable the Night Service
Coverage Control option to automatically control the status of telephones
programmed with Coverage VMS (voice messaging system) Off buttons,
according to Night Service status.
When Coverage Control is enabled and the MERLIN LEGEND Communications
System is put into Night Service, all programmed Coverage VMS Off buttons are
automatically turned off (LED is unlit) and all eligible outside calls are sent to the
assigned voice messaging system calling group with normal ringing delay. When
Night Service is deactivated during the day, all programmed Coverage VMS Off
buttons are automatically turned on (LED is lit) and voice mail coverage is
disabled for outside calls.
Users can override the Coverage VMS Off button status at any time by pressing
the programmed Coverage VMS Off button to turn the LED on or off.
Night Service Group Line Assignment 0
Beginning with Release 4.1, a system manager can assign lines to Night Service
groups to control handling of after-hours calls received on individual lines. This
capability replaces the automatic assignment to Night Service groups of only
those lines that ring on the Night Service operator console. An outside line must
be assigned to a Night Service group to receive Night Service treatment.