Lucent Technologies MERLIN LEGEND 6 - Manual (Page 309)

MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide
555-660-118
Issue 1
February 1998
Managing the System
Page 6-79 Revising Night Service with Group Assignment
6
Task List: Changing Group
Coverage Assignments
6
o
Obtain Form 7c, Group Coverage.
o
If necessary, read “Coverage” in the Feature Reference for detailed
information about this feature.
o
Plan changes using the planning guidelines above; record the new values
on Form 7c.
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for “Group Coverage
Member Assignments” in the “Optional Group Features” section of
System
Programming, Chapter 3, or the summary programming instructions below.
o
When you have finished, file Form 7c with the rest of the planning forms.
Programming Instructions 6
Revising Night Service
with Group Assignment
6
Use this procedure to add or remove extensions, lines (Release 4.1 and later
systems only), and a calling group to a Night Service group for after-hours
coverage.
Planning Guidelines 6
Revising Night Service with Group Assignment may affect other features. For
more information, see the
Feature Reference.
There can be a maximum of eight Night Service groups (no more than one for
each operator position assigned). Any number of extensions can be assigned to a
Night Service group, and an extension can belong to more than one group.
A calling group can also be assigned to a Night Service group.
In Release 4.1 and later systems, you assign outside lines, as well as extensions,
to a Night Service group. When Night Service is turned on by the operator, these
lines ring immediately at all extensions assigned to the group. This feature allows
Console Procedure @‘‡r†v‚†
→
More
→
B ‚ˆƒÃ8‚‰r
→
Dial group no.
→
@‡r
→
Dial ext. no.
→
@‡r
→
@‘v‡
→
@‘v‡
PC Procedure
И
→

→
Е
→
Type group no.
→

→
Type ext.
no.
→

→
З
→
З