Panasonic KX-PS8100 User Manual
Page 120
120
Installing Software for Windows
7
Press Tab and type the internal name of the printer in
lowercase letters.
NOTES:
•
Type this name exactly as shown; it is required for
communication with the printer.
The name must be one of these:
xjdirect
xjhold
xjprint
•
Use the last two internal names only if your printer has a hard
disk drive and a minimum of 32 MB of memory.
8
Click
[OK]
.
The workstation checks the address or DNS name that you entered
and notifies you if it cannot resolve the address.
9
Click
[Close]
of the Printer Ports window.
The Ports property tab shows the new port configuration.
10
Click
[OK]
to close the Panasonic KX-PS8100
Properties window.
The new port has been configured. You should now print a test
page to verify the connection.
11
Open the Panasonic KX-PS8100 Properties window.
Click the General tab and click Print Test Page.
When you print, your files are sent over the LPR Port connection to
the printer.
12
Click
[OK]
to exit.
When a Typical installation is performed using the installer, following files
are automatically installed.
•
Digital Duplicator Utility
•
Status Display
•
Scanner Driver
You can also select following additional file to install during a Custom
installation procedure.
•
Print Count Manager
32
Installing the
scanner driver and
utilities for Windows
NT 4.0