Panasonic KX-PS8100 - Manual (Page 35)

35
Before You Start
Scanner panel overview
This section describes the functions of the scanner panel, illustrated below:
The scanner LCD has two 20-character lines to display the scanner’s or
duplicator’s status/error messages or the duplicator’s menu settings. When
the duplicator is ready, “
Ready ” with duplicate settings such as number of
copy, density setting is displayed.
The activity light indicates the status of the scanner. It has the following
meanings:
* 1 Blinking with an interval of approximately 1.7 seconds
* 2 Blinking with an interval of approximately 0.9 second
* 3 Blinking with an interval of approximately 0.7 second
This light Indicates
READY/ERROR indicator—
• The READY indicator (green)
ON: the scanner is ready for operation.
Blinking: the scanner is initializing or scanning.
• The ERROR indicator (orange)
ON: an internal error (Call for Service Error) has
occurred.
Blinking: user correctable error such as ADF jam has
occurred.
Status
READY Indicator
(green)
ERROR Indicator
(orange)
Diagnosing…/Initializing… Blinking* 1 OFF
Ready ON OFF
Scanning Blinking* 2 OFF
Scanning (for duplicate) Blinking* 3 OFF
Printing (for duplicate) Blinking* 1 OFF
User Correctable Error OFF Blinking
Call for Service Error OFF ON
LCD (Liquid
Crystal Display)
panel
INCREASE/NEXT
MODE
READY/ERROR
STOP START
B/W
RESET ENTER
START
COLOR
Activity light
READY/ERROR