Panasonic KX-PS8100 - Manual (Page 277)

277
Options
5 Insert the other end of the cable into the connector on
the printer controller board, directing a projection on the
cable against the groove in the connector.
Slide the cable until the click is heard.
6 Put the four stand offs of the hard disk drive into the four
holes, and secure the hard disk drive on the printer
controller board with four screws.
7 Stick the label provided to the hard disk drive.
8 Replace the printer controller board in the printer.
For instructions, see “Removing and replacing the printer controller
board” on page 273 .
Projection