Panasonic KX-PS8100 - Manual (Page 162)

162
Setup from the Printer Panel and WebSetup
Select Zone— The printer searches the network for AppleTalk zones in
your network segment. Scroll through the list to select the AppleTalk zone in
which you want the printer to appear. If your segment has only one zone,
the printer is assigned to that zone automatically.
If no AppleTalk zone can be found, your network may have no defined
zones, or else the network cable has not been connected (
see page 70 ).
Choose [OK] .
Select Frames—Click the Select Frames button to specify IPX frames
used with NetWare. See your network administrator to verify which frame
type to choose.
In the IPX Frames window, select frames and use the Add and Remove
buttons to specify the selected frames.
■ PServer Setup tab
IPX (Novell NetWare) options are set in the PServer Setup tab.
You can modify both NetWare 3.x (Bindery) and NetWare 4.x (NDS)
configurations from Fiery WebSetup. Turn on the Enable NDS option if your
network uses NetWare 4.x in native mode. Click Bindery Setup if your
network uses NetWare 3.x or uses NetWare 4.x in bindery emulation mode.