Panasonic KX-PS8100 - Manual (Page 157)

157
Setup from the Printer Panel and WebSetup
■ Password tab
From the Password tab you can set an Administrator password or change
the existing one. Once an Administrator password has been set, users will
be prompted for this password when they attempt to access
Fiery WebSetup or Fiery WebSpooler.
To set or change the Administrator password:
Click the Password tab.
Enter New Password—To set a new password, enter a password in the
Enter New Password text field.
Verify New Password—To verify a new password, enter the same
password in the Verify New Password text field as you have entered in the
Enter New Password text field.
NOTE:
• By default no password is set on the printer. It is recommended that a
password be set to protect the printer from accidental or incorrect
changes to printer Setup settings.