Panasonic KX-PS8100 - Manual (Page 202)

202
Basic Operations
There are several pages that you can print from the printer panel. This
section provides instructions for printing a Test Print, a Configuration Page,
and PostScript Font List.
The Test Print includes a color sample as well as the printer’s name,
enabled network protocols, memory configurations, and installed options.
The Configuration Page lists information about the printer, the current Setup
configuration, and the number of printer fonts. It’s a good idea to print a
Configuration Page before you make Setup changes, in case you need to
restore some settings later.
The PostScript Font List prints out the list of available printer fonts.
You can print a Test Print before you set up the printer—or at any other time
from the “
Ready ” or the “ Ready(Sleep) ” screen.
To print a Test Print:
1 Turn on the printer and allow it to warm up.
Messages appear on the printer panel as the KX-PS8100 printer
runs through its power-up tests.
2 From the Ready screen, press the MENU/EXIT button
on the printer panel.
3 Press the ENTER button.
4 Press the ▲ /CONTINUE button until you see Test Print
and then press the ENTER button.
5 Examine the quality of the Test Print.
Printing pages
from the printer
panel
Installed Memory (RAM): 32MB
Memory
Panasonic KX-PS8100
Configuration
Printer Name: KX-PS8100
Resolution: 600 dpi x 600 dpi
Printer Language(s): PS3
Calibration: NO
Test Print