Panasonic KX-PS8100 - Manual (Page 200)

200
Basic Operations
Parallel Port
Setup Enable printing through the
parallel port, set parallel port
timeout, specify data mode.
• Parallel Port Setup
Enable Parallel ?
Timeout
Data Mode
See page 146
Network Port
Setup Specify Ethernet or Token Ring
settings for network connections
to the printer.
• Ethernet Setup
Ethernet Speed
• Token Ring Setup
Token Ring Speed
Max. Frame Size
Source Routing
Req. All Route
Resp. All Route
See page 146
Network Protocol
Setup Specify settings for network
protocols, including TCP/IP,
AppleTalk, and IPX/SPX.
• TCP/IP Setup
Enable TCP/IP ?
Ethernet IP Address
or Token Ring IP Address* 1
Ethernet Subnet Mask
or Token Ring Subnet Mask* 1
Gateway Address
• AppleTalk Setup
Enable AppleTalk ?
AppleTalk Zone
• IPX/SPX Setup
Enable IPX/SPX ?
See page 148
Language Specify the language of the LCD
text, and the language used in
the Test, Configuration, and
Calibration pages. See page 150
Reset Queues* 2 Clear all jobs from queues and
clear the Job Log. See page 150
Main menus To specify Notes
(Continued)
* 1 These menus are available when using Token Ring network card.
* 2 This menu is available only on printers with a hard disk drive.