Panasonic KX-PS8100 - Manual (Page 252)

252
Care and Maintenance
Multi-Purpose Tray
Empty
Add media to multi-purpose tray.
NVRAM Error
Settings Changed
NVRAM hardware error. Cycle Power. If
printer does not function normally, call for
service.
NVRAM Full
Settings Lost
Hardware error of Flash DIMM. Cycle
Power. If printer does not function normally,
call for service.
Oil Roll
Not installed
Install oil web unit.
Oil Roll
wearing out
Oil supply roll will need to be replaced soon.
Oil Roll
Worn out
Replace the oil web unit.
Out of Memory
Job Cleared
Not enough memory to finish printing.
Change printing resolution to 600 x 600 dpi if
you selected higher resolution.
or
Install additional memory in the printer.
Out of Memory
Job Failed
Not enough memory to finish printing.
Change printing resolution to 600 x 600 dpi if
you selected higher resolution.
or
Install additional memory in the printer.
Output Tray
Full
Remove media from Output tray.
Page
Too complex
Not enough memory to finish printing.
Change printing resolution to 600 x 600 dpi if
you selected higher resolution.
or
Install additional memory in the printer.
Paper Feeder
Not installed
Install paper feeder.
Parallel I/O
Buffer Overflow
Not enough memory to finish printing.
PJL Operations
Failed
Error in PJL code. Resend print job to the
printer.
Message Corrective Action/Additional Information