Panasonic KX-PS8100 - Manual (Page 128)

128
Installing Software for Windows
When a Typical installation is performed using the installer, following files
are automatically installed.
• Digital Duplicator Utility
• Status Display
• Scanner Driver
You can also select following additional file to install during a Custom
installation procedure.
• Print Count Manager
NOTES:
• If you are using Windows 3.1, disable or uninstall any application
software’s printer status to prevent conflicts with the KX-PS8100 Status
Display for Windows 3.1.
• When reinstalling the KX-PS8100 software, do it immediately after
restarting Windows.
To install the bundled software (CorelDRAW Select Edition), see “Installing
the bundled software” on page 133 .
To install the scanner driver and utilities:
1 Start Windows and quit all applications.
2 Insert the KX-PS8100 CD-ROM Disc2 in your CD-ROM
drive.
3 Click File menu from the Program Manager window
and click Run... .
4 Click [Browse...] and select your CD-ROM drive from
the [Drives:] box.
5 Select setup.exe , and click [OK] .
6 Click [OK] .
The installer starts. The Choose Setup Language window is
displayed.
7 Select the language, and click [OK] .
Wait until the Welcome window is displayed.
8 Click [NextÃ] after reading the window carefully.
The Setup Type window is displayed.
Installing the
scanner driver
and utilities for
Windows 3.1