Panasonic KX-PS8100 - Manual (Page 226)

226
Care and Maintenance
4 a) Holding the green tab on the right, slide the fuser out
until it stops.
b) Press the green lever on the left to release the safety
catch.
5 a) Hold the fuser as shown below, and slide it out of the
printer.
b) Close the printer’s front door.
SAFETY CAUTIONS:
• The fuser unit weighs approximately 3.1 k g {6.8 lbs.}. Take care
when handling it.
• Do not touch the roller and the parts around the roller when
handling the fuser, because they may be hot.
.
a
b
CAUTION:
HOT SURFACE INSIDE
b
a
Roller