Panasonic KX-PS8100 - Manual (Page 293)

293
Appendix
■ Transparencies and labels
You may also print on transparencies and labels that are made for the
printer. Panasonic has tested and found that the following work
satisfactorily:
OHP transparency: 3M CG3710
• Re-using transparencies that have been fed through the printer once (for
example, after jams or if the transparency is ejected without being
printed) can reduce the life of the consumables and paper path
components.
• The transparency has a side to be printed. The other side has a leading
tape.
When loading the transparency, load it with the taped end entering the
printer first.
The transparency can be loaded in the multi-purpose tray and
transparency tray (option). To get better print result, use the transparency
tray. Note that the direction for loading differs depending on each tray.
Labels: AVERY 5163, AVERY 5164, AVERY 5165, Avery L7163,
Avery L7165, Avery L7166, Avery L7167, Avery L7168, Avery
L7169
• With any label stock, the labels must completely cover the backing
material.
Labels cover the entire backing material.
YES
The backing material is exposed.
NO