Panasonic KX-PS8100 - Manual (Page 156)

156
Setup from the Printer Panel and WebSetup
In System Setup, you specify settings from two tabs: the System Setup tab
and the Password tab.
To set System Setup options:
Click the [System\Setup] button.
■ System Setup tab
The options that you can set from the System Setup tab are described
below.
System Name—The default name of the printer appears in this text field.
Edit the default name here. This is the name you should enter when you
configure a connection to the printer over AppleTalk.
Print Start Page—The KX-PS8100 printer does not have Start Page. So
please ignore this setting.
Enable Printed Queue—If your printer has a hard disk drive installed,
select this option to create a storage location on the hard disk for the most
recent print jobs. Users with Administrator privileges can use the
WebSpooler to reprint jobs in the printed queue without sending those jobs
to the printer again.
Jobs Saved in Printed Queue—Specify the number of jobs (from 1-99) to
be saved in the Printed Queue.
System Setup