Panasonic KX-PS8100 - Manual (Page 158)

158
Setup from the Printer Panel and WebSetup
In Network Setup, you specify settings from four tabs: Port Setup, Protocol
Setup, PServer Setup, and Service Setup.
To set Network Setup options:
Click the [Network\Setup] button.
The Port Setup tab is the first tab displayed in Network Setup. You can also
access Protocol Setup, PServer Setup, and Service Setup tabs from this
window. After setting all the options in the Port Setup tab, click the next tab
and continue to specify settings until you have made settings for all relevant
options in the Network Setup category.
■ Port Setup tab
The options that you can set from the Port Setup tab are described below.
Enable Ethernet—Enable this option if the printer is to be connected to an
Ethernet network.
Transmission Speed—Select Auto Detect if your network environment is
mixed, or select the speed (10 Mbps or 100 Mbps) of the network to which
the printer is attached.
Network Setup