Panasonic KX-PS8100 - Manual (Page 74)

74
Connecting the Printer to a Network
4 Use the ▲ /CONTINUE button to select a number in a
valid, unique IP Address for the KX-PS8100. Press
⁄ ⁄ ⁄ ⁄ /CANCEL button to accept a number and move to the
left—to the next number.
NOTE:
• On the printer, numbers are entered from right to left. Press the
▲ /CONTINUE button to scroll through numbers from 0 to 9.
Press the ⁄ /CANCEL button to accept a number and move to the
next.
5 When you have finished entering all numbers in the
address, press
ENTER button to advance to the Subnet
Mask screen. Press ENTER .
6 Use the ▲ /CONTINUE button to select a number as the
Subnet Mask value for the KX-PS8100. Press
⁄ ⁄ ⁄ ⁄ /CANCEL button to accept a number and move to the
left—to the next number.
7 Specify the Gateway Address in the printer’s Setup
menus, if needed.
See “Network Protocol Setup” on page 148 for details.
8 When you have finished entering all numbers, press
MENU/EXIT button.
After being rebooted, the printer will return to Ready mode.