Panasonic KX-PS8100 - Manual (Page 207)

207
Basic Operations
Output Order
(ADF) Select Face Up or Face Down
printing.
• Face Down *1
Makes a duplicate(s) of your
original document(s) face down in
the printer’s output tray.
• Face Up
Makes a duplicate(s) of your
original document(s) face up in the
printer’s output tray.
NOTE:
• The Output Order (ADF) is effective
only when using ADF. When using
the flatbed (scanner glass) or the
multi-purpose tray, your duplicate
will always be printed face up.
Power Saver To conserve energy and operating
cost, this scanner is provided with a
programmable power save feature.
Scanner is factory set with the power
save feature turned on.
If Power Saver is set to On, the
scanner enters the Power Saver
mode when it is idle for approximately
5 minutes. To reactivate the scanner,
scan a document.
The Power Saver setting will remain
effective even if the scanner is turned
off.
• On *1
• Off
NOTE:
• When the printer is in the Power
Saver mode [“Sleep” is displayed
on the scanner LCD.], press any
button on the scanner panel to
release the Power Saver mode.
Main menus To specify Notes
*1 Factory default setting (Continued)