181 color calibration, Calibration: before calibration: after – Panasonic KX-PS8100 User Manual

Page 181

Advertising

181

Color Calibration

To print a Color Test that uses the original values and a
Color Test that uses the new values, press the ENTER
button.

NOTE:

•

You can skip printing Color Test page by selecting Skip.

Before applying the calibration changes compare the Color Test
that uses the original calibration values against the Color Test that
uses the new values. If you are satisfied with the printer’s
calibration based on the new values, select

Yes

from the Apply

Changes screen that appears, and press the ENTER button to
recalibrate the printer based on the previously entered values. If
you are not satisfied with the printer’s calibration based on the new
values, select

from the Apply Changes screen that appears. Or

if you want to reset the calibration, select Default.

Panasonic KX-PS8100

Configuration

Printer Name: KX-PS8100
Resolution: 600 dpi x 600 dpi
Printer Language(s): PS3

Memory

Installed Memory (RAM): XXMB
Disk: Not Installed

Network Information

Apple Talk: Enabled
Ethernet TCP/IP: Enabled
Novell: Enabled
SMB: Disabled
Ethernet: Enabled

As an ENERGY STAR(R) Partner, Panasonic has determined that this product meets the ENERGY STAR(R) guidelines for energy efficiency.

ENERGY STAR is a U.S. registered trademark.

Fiery Driven, the Fiery Driven logo, VisualCal, ColorWise, and NetWise are trademarks of Electronics for Imaging, Inc.

Calibration: Before