Panasonic KX-PS8100 - Manual (Page 247)

247
Care and Maintenance
ADF top cover open.
Close the ADF top cover.
ADF top cover is open.
Close the ADF top cover.
Memory OverFlow
Add SDRAM to Printer Print memory is not enough for
duplicating.
Press the RESET/STOP button to return
to “Ready”.
Add memory to printer.
Memory OverFlow
Select Lower Quality Print memory is not enough for
duplicating.
Press the RESET/STOP button to return
to “Ready”.
Select a lower quality.
No detection marker in ADF The white sheet is dirty.
Clean the white sheet.
Remove document from
ADF tray. A document is placed in the ADF tray
when power is turned on.
Remove the document from the ADF tray.
A document is placed in the ADF tray
when a jam is cleared.
Remove the document from the ADF tray.
SCSI error Communication cannot be established
between the scanner and printer.
Connect the SCSI cable correctly.
or
Make sure that the computer connected
with the SCSI cable is turned on.
Saving Scanner is saving the data using
DataSave function.
Loading Scanner is loading the data using
DataLoad function.
Message
Corrective Action/Additional
Information