Panasonic KX-PS8100 - Manual (Page 184)

184
Color Calibration
5 To print a Color Test that uses the new values, press
the ENTER button.
Color Adjust Test pages that use the previous value and the new
values are printed.
6 Press the ENTER button.
The Apply Changes menu appears.
7 To apply the new color and brightness values use the
⁄ /CANCEL button or the ▲ /CONTINUE button to
select Yes. Press the ENTER button.
NOTE:
• Changes made using Color Adjustment are retained until the printer is
recalibrated. Or reset the adjusted colors to the last calibration made
using the Reset All to 0 option in the Adjust Color screen; or recalibrate
the printer using VisualCal.
Panasonic KX-PS8100
Configuration
Printer Name: KX-PS8100
Resolution: 600 dpi x 600 dpi
Printer Language(s): PS3
Memory
Installed Memory (RAM): XXMB
Disk: Not Installed
Network Information
Apple Talk: Enabled
Ethernet TCP/IP: Enabled
Novell: Enabled
SMB: Disabled
Ethernet: Enabled
Color Adjustment: Before
Panasonic KX-PS8100
Configuration
Printer Name: KX-PS8100
Resolution: 600 dpi x 600 dpi
Printer Language(s): PS3
Memory
Installed Memory (RAM): XXMB
Disk: Not Installed
Network Information
Apple Talk: Enabled
Ethernet TCP/IP: Enabled
Novell: Enabled
SMB: Disabled
Ethernet: Enabled
Color Adjustment: After
Color Adjustment: Before Color Adjustment: After
As an ENERGY STAR(R) Partner, Panasonic has determined that this product meets the ENERGY STAR(R) guidelines for energy efficiency.
ENERGY STAR is a U.S. registered trademark.
Fiery Driven, the Fiery Driven logo, VisualCal, ColorWise, and NetWise are trademarks of Electronics for Imaging, Inc.
As an ENERGY STAR(R) Partner, Panasonic has determined that this product meets the ENERGY STAR(R) guidelines for energy efficiency.
ENERGY STAR is a U.S. registered trademark.
Fiery Driven, the Fiery Driven logo, VisualCal, ColorWise, and NetWise are trademarks of Electronics for Imaging, Inc.