Panasonic MINAS A4P Series - Manual (Page 103)

103
[Setting]
Setting
Outline of Setup Support Software, "PANATERM ® "
Outline of PANATERM ®
With the PANATERM ® , you can execute the followings.
(1) Setup and storage of parameters, and writing to the memory (EEPROM).
(2) Monitoring of I/O and pulse input and load factor.
(3) Display of the present alarm and reference of the error history.
(4) Data measurement of the wave-form graphic and bringing of the stored data.
(5) Normal auto-gain tuning
(6) Frequency characteristic measurement of the machine system.
How to Connect
RS232
Connect to CN X4.
• Connecting cable
DV0P1960
(DOS/V)
Setup support software
Setup disc of "PANATERM
® "
DV0P4460 (English/Japanese version)
Supporting OS : Windows ® 98, Windows ® 2000,
Windows ® Me, Windows ® XP
Install the "PANATERM ® " to Hard Disc
<Cautions/Notes>
1. 15MB capacity of hard disc is required. OS to be Window
® 98, Windows ® 2000, Windows ® Me or Win-
dows ® XP.
2. Install the "PANATERM ® " to a hard disc, using the setup disc according to the procedures below to log on.
Procedure of install
1) Turn on the power of the computer to log on the supporting OS. (Exit the existing logged on software.)
2) Insert the setup disc of the "PANATERM
® " to CD-ROM drive.
3) When a window has opened automatically, click a name of file required.
* If a window has not opened automatically, execute the target setup file through the Explorer.
4) Operate according to the guidance of the setup program file.
5) Click on the installation verification window to start the setup.
6) Exit all applications and log on Windows
® again.
"PANATERM ® " will be added on program menu when you log on again.