Before using the products, E and f-frame – Panasonic MINAS A4P Series User Manual

Page 19

Advertising

[Before Using the Products]

Before Using

the Products

Terminal cover

Screw for cover M3

Display LED (2-digit)

ID address setup
rotary switch (MSD, LSD)

Connector, CN X5
for host connection

Connector, CN X6
for encoder connection

Connector, CN X7
for external scale connection

Connector, CN X4B
(For manufacturers' use only:
Not for individual use)

Connector, CN X4A
(For manufacturers' use only:
Not for individual use)

Communication
connector, CN X4

Velocity monitor check pin (SP)
Torque monitor check pin (IM)

Check pin (G : GND)

Screws for earth (x2)

Main power
input terminals
(L1,L2,L3)

Control power
input terminals
(r, t)

Terminals
for external
regenerative
resistor
(P, B1, B2)

Terminals
for motor
connection
(U,V,W)

• E and F-frame

e.g.) : MEDDT7364P (3-phase, 200V, 2.0kW : E-frame)

<Note>
For details of each model, refer to "Dimensions " (P.192 to 194) of Supplement.

e.g.) : MFDDTB3A2P (3-phase, 200V, 5.0kW : F-frame)