Figure 60 basic setting > g.bond, Table 31 basic setting > g.bond – ZyXEL Communications IES-708-22A User Manual
Page 136
Chapter 16 G.bond
IES-708-22A User’s Guide
136
Figure 60 Basic Setting > G.bond
The following table describes the labels in this screen.
Table 31 Basic Setting > G.bond
LABEL
DESCRIPTION
G.bond Status
Click G.bond Status to look at the status of each port in each bond (see
).
Index
This is the number of the bond. Click a profile’s index number to edit the profile.
You cannot edit the DEFVAL profile.
Bond Name (STUC) This is the name of the bond.
SID
This is the length of the sequence ID used in this bond.
US/DS (kbps)
This is the maximum upstream bandwidth and maximum downstream
bandwidth available through this bond. This is calculated from the maximum
rate available through each port.
Delete
Select the check box for one or more bonds, and click Delete to remove the
selected bond(s).
Cancel
Select this to clear the fields in this screen without saving any changes.
Bond Name
Enter the name of the bond. You can use up to 31 English keyboard characters;
double quotation marks (“) and spaces are not allowed.
SID
Select the length of the sequence ID used in this bond. The STU-C specifies
this value.
sid8: The sequence ID is 8 bits long.
sid12: The sequence ID is 12 bits long.
Port
This field displays the DSL port number.
Member
Select this to include this port in the bond. Clear this to remove this port from the
bond. Select All to include all of the ports in the bond. Select None to include
none of the ports in the bond.