ZyXEL Communications IES-708-22A User Manual
Page 259
Chapter 42 Commands
IES-708-22A User’s Guide
259
mac count enable
<portlist>
(STUC mode only) Turns on the
MAC address count filter for an
DSL port(s).
H/H
mac count disable
<portlist>
(STUC mode only) Turns off the
MAC address count filter for an
DSL port(s).
H/H
mac count set
<portlist> <count>
(STUC mode only) Sets the MAC
address count filter for an DSL
port(s).
H/H
mac filter show
[portlist]
(STUC mode only) Displays MAC
filter settings.
M/L
mac filter enable
[portlist]
(STUC mode only) Turns on the
MAC filter.
H/H
mac filter disable
[portlist]
(STUC mode only) Turns off the
MAC filter.
H/H
mac filter mode
<port> <accept|deny>
(STUC mode only) Sets the MAC
filter to accept or deny.
H/H
mac filter set
<port> <mac> [<mac>
<mac> ...]
(STUC mode only) Adds a MAC
filter MAC entry on an DSL
port(s).
H/H
mac filter delete
<port> <mac> [<mac>
<mac> ...]
(STUC mode only) Removes a
MAC filter MAC entry on an DSL
port(s).
H/H
pktfilter show
[portlist]
(STUC mode only) Display packet
filter settings.
M/L
pktfilter set
<portlist> <filter>
(STUC mode only) Set packet
filter for port
H/H
pktfilter pppoeonly
<portlist>
(STUC mode only) Set packet
filter to pppoe only for port.
H/H
dot1x show
[portlist]
(STUC mode only) Display dot1x
settings.
M/L
dot1x enable
(STUC mode only) Turn on dot1x. H/H
dot1x disable
(STUC mode only) Turn off dot1x. H/H
dot1x auth
<profile|radius>
(STUC mode only) Set
authentication method to profile or
radius.
H/H
dot1x port enable
<portlist>
(STUC mode only) Turn on dot1x
on port.
H/H
dot1x port disable
<portlist>
(STUC mode only) Turn off dot1x
on port.
H/H
dot1x port control
<portlist>
<auto|auth|unauth>
(STUC mode only) Set port
authentication status.
H/H
dot1x port reauth
<portlist> <on|off>
(STUC mode only) Turn on or turn
off port to do reauthentication.
H/H
dot1x port peroid
<portlist> <period>
(STUC mode only) Set port reauth
period.
H/H
dot1x radius show
(STUC mode only) Display radius
server settings.
M/L
Table 89 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P