ZyXEL Communications IES-708-22A - Manual (Page 221)

Chapter 35 Access Control
IES-708-22A User’s Guide
221
35.3.1 Supported MIBs
MIBs let administrators collect statistics and monitor status and performance. See Chapter 57
on page 387 for the list of MIBs the IES-708-22A supports.
35.3.2 SNMP Traps
The IES-708-22A can send the following SNMP traps to an SNMP manager when an event
occurs. ATUC refers to the downstream channel (for traffic going from the IES-708-22A to the
subscriber). ATUR refers to the upstream channel (for traffic coming from the subscriber to
the IES-708-22A).
Table 76 SNMP Traps
TRAP NAME DESCRIPTION OID
coldStart System Cold Start 1.3.6.1.6.3.1.1.5.1
warmStart System Warm Start 1.3.6.1.6.3.1.1.5.2
linkDown Both Ethernet and DSL link Down 1.3.6.1.6.3.1.1.5.3
linkUp Both Ethernet and DSL link UP 1.3.6.1.6.3.1.1.5.4
hdsl2ShdslLoopAttenCrossing This notification indicates that the loop
attenuation threshold (as per the
hdsl2ShdslEndpointThreshLoopAttenuation
value) has been reached/exceeded for the
HDSL2/SHDSL segment endpoint.
1.3.6.1.2.1.10.48.0.1
hdsl2ShdslSNRMarginCrossing This notification indicates that the SNR margin
threshold (as per the
hdsl2ShdslEndpointThreshSNRMargin value) has
been reached/exceeded for the HDSL2/SHDSL
segment endpoint.
1.3.6.1.2.1.10.48.0.2
hdsl2ShdslPerfESThresh This notification indicates that the errored
seconds threshold (as per the
hdsl2ShdslEndpointThreshES value) has been
reached/ exceeded for the HDSL2/SHDSL
segment endpoint.
1.3.6.1.2.1.10.48.0.3
hdsl2ShdslPerfSESThresh This notification indicates that the severely
errored seconds threshold (as per the
hdsl2ShdslEndpointThreshSES value) has been
reached/exceeded for the HDSL2/SHDSL
Segment Endpoint.
1.3.6.1.2.1.10.48.0.4
hdsl2ShdslPerfCRCanomaliesT
hresh
This notification indicates that the CRC anomalies
threshold (as per the
hdsl2ShdslEndpointThreshCRCanomalies value)
has been reached/exceeded for the HDSL2/
SHDSL Segment Endpoint.
1.3.6.1.2.1.10.48.0.5
hdsl2ShdslPerfLOSWSThresh This notification indicates that the LOSW seconds
threshold (as per the
hdsl2ShdslEndpointThreshLOSWS value) has
been reached/exceeded for the HDSL2/SHDSL
segment endpoint.
1.3.6.1.2.1.10.48.0.6
hdsl2ShdslPerfUASThresh This notification indicates that the unavailable
seconds threshold (as per the
hdsl2ShdslEndpointThreshUAS value) has been
reached/exceeded for the HDSL2/SHDSL
segment endpoint.
1.3.6.1.2.1.10.48.0.7