ZyXEL Communications IES-708-22A - Manual (Page 208)

Chapter 31 TLS PVC
IES-708-22A User’s Guide
208
Show Port Select which DSL port(s) for which to display TLS PVC settings.
Index This field displays the number of the PVC. Click a PVC’s index number to use
the top of the screen to edit the PVC.
Note: At the time of writing, you cannot edit the VPI and VCI. If
you want to change them, add a new PVC with the desired
settings. Then you can delete any unwanted PVCs.
Port This field displays the number of the DSL port on which the PVC is configured.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a channel on this port.
VID This is the VLAN ID assigned to frames received on this channel.
Priority This is the priority value (0 to 7) added to incoming frames without a (IEEE
802.1p) priority tag.
DS/US VC Profile This shows which VC profile this channel uses for downstream traffic shaping.
The VC profile for upstream policing also displays if the channel is configured to
use one.
Select
Delete Select the check box in the Select column for an entry, and click Delete to
remove the entry.
Select All Click this to select all entries in the table.
Select None Click this to un-select all entries in the table.
Table 68 Advanced Application > TLS PVC (continued)
LABEL DESCRIPTION