ZyXEL Communications IES-708-22A - Manual (Page 145)

Chapter 17 VLAN
IES-708-22A User’s Guide
145
Cancel Click Cancel to begin configuring this screen afresh.
Copy port
Paste Do the following to copy settings from one port to another port or ports.
1. Select the number of the port from which you want to copy settings.
2. Click Paste and the following screen appears.
3. Select to which ports you want to copy the settings. Use All to select every
port. Use None to clear all of the check boxes.
4. Click Apply to paste the settings.
Figure 65 Select Ports
A. At the time of writing, the VLAN Acceptable Frame Type field is read-only for the Ethernet ports. The
IES-708-22A accepts both tagged and untagged incoming frames on the Ethernet ports.
Table 35 Advanced Application > VLAN > VLAN Port Setting (continued)
LABEL DESCRIPTION