ZyXEL Communications IES-708-22A - Manual (Page 209)

IES-708-22A User’s Guide
209
C
H A P T E R
32
ACL
This feature is available in STU-C mode only.
This chapter shows you how to set up ACL profiles on each port.
32.1 Access Control Logic (ACL) Overview
An ACL (Access Control Logic) profile allows the IES-708-22A to classify and perform
actions on the upstream traffic. Each ACL profile consists of a rule and an action, and you
assign ACL profiles to PVCs.
32.1.1 ACL Profile Rules
Each ACL profile uses one of 14 rules to classify upstream traffic. These rules are listed below
by rule number.
1 etype <etype> vlan <vid>
2 etype <etype> smac <mac>
3 etype <etype> dmac <mac>
4 vlan <vid> smac <mac>
5 vlan <vid> dmac <mac>
6 smac <mac> dmac <mac>
7 vlan <vid> priority <priority>
8 etype <etype>
9 vlan <vid>
10 smac <mac>
11 dmac <mac>
12 priority <priority>
13 protocol <protocol>
14 {srcip <ip>/<mask>{|dstip <ip>/<mask>{|tos <stos> <etos> {|srcport <sport> <eport>
{|dstport <sport> <eport>}}}}}
The input values for these values have the following ranges.
• <vid>: 1~4094
• <priority>: 1~7
• <etype>: 0~65535
• <protocol>:
tcp|udp|ospf|igmp|ip|gre|icmp|<ptype>
• <ptype>: 0~255