ZyXEL Communications IES-708-22A - Manual (Page 178)

Chapter 24 Port Authentication
IES-708-22A User’s Guide
178
Cancel Click Cancel to begin configuring this screen afresh.
Port This field displays a port number.
Enable Select this check box to turn on IEEE 802.1x authentication on this port.
Control Select AUTO to authenticate all subscribers before they can access the network
through this port.
Select FORCE AUTHORIZED to allow all connected users to access the
network through this port without authentication.
Select FORCE UNAUTHORIZED to deny all subscribers access to the network
through this port.
Reauthentication Specify if a subscriber has to periodically re-enter his or her username and
password to stay connected to the port.
Reauthentication
Period(s)
Specify how often a client has to re-enter his or her username and password to
stay connected to the port.
Apply Click Apply to save your changes to the IES-708-22A’s volatile memory. The
IES-708-22A loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 54 Advanced Application > Port Authentication > 802.1x (continued)
LABEL DESCRIPTION