ZyXEL Communications IES-708-22A - Manual (Page 219)

IES-708-22A User’s Guide
219
C
H A P T E R
35
Access Control
This chapter describes how to configure access control.
35.1 Access Control Screen
Use this screen to configure SNMP and enable/disable remote service access.
To open this screen, click Advanced Application > Access Control.
Figure 111 Advanced Application > Access Control
35.2 Access Control Overview
This table identifies the number of sessions that can be established using each service.
35.3 SNMP
Simple Network Management Protocol is a protocol used for exchanging management
information between network devices. SNMP is a member of TCP/IP protocol suite. A
manager station can manage and monitor the IES-708-22A through the network via SNMP
version one (SNMPv1) and/or SNMP version 2c. The next figure illustrates an SNMP
management operation. SNMP is only available if TCP/IP is configured.
Table 74 Access Control Summary
CONSOLE
PORT
TELNET FTP WEB SNMP
Number of sessions allowed 1 5 1 No limit No limit