ZyXEL Communications IES-708-22A - Manual (Page 337)

Chapter 53 DSL Commands
IES-708-22A User’s Guide
337
Information obtained prior to training to steady state transition will not be valid or will be old
information.
The vendor ID, vendor version number and product serial number are obtained from vendor
ID fields (see ITU-T G.994.1) or R-MSGS1 (see T1.413).
53.2.4 DSL Port Lineperf Command
Syntax:
ras> statistics shdsl lineperf <portlist>
where
This command shows the line performance counters of a DSL port.
An example is shown next.
vendor model This field displays the vendor model number.
vendor serial This field displays the vendor serial number.
vendor other This field displays the other vendor information.
software version This field displays the vendor software version.
equipment code This field displays the equipment code conforming to ANSI T1.213, Coded
Identification of Equipment Entities.
Table 95 DSL Port Lineinfo Command Counters (continued)
LABEL DESCRIPTION
<portlist> = You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
ras> statistics shdsl lineperf 1
[Port 1]
Performance since boot up
STUC STUR
es : 1 0 seconds
ses : 1 0 seconds
crc : 0 0
losws : 10 0 seconds
uas : 0 0 seconds
segment anomaly : 0 0
segment defect : 0 0
Performance since link up
es : 1 seconds
ses : 1 seconds
crc : 0
losws : 5 seconds
uas : 0 seconds
segment anomaly : 0
segment defect : 0