Snmp, 1 snmp commands, 1 get community command – ZyXEL Communications IES-708-22A User Manual
Page 327: 2 set community command, 3 trusted host set command, Chapter 52 snmp, Snmp (327)
IES-708-22A User’s Guide
327
C
H A P T E R
52
SNMP
This chapter covers Simple Network Management Protocol (SNMP) with the IES-708-22A.
52.1 SNMP Commands
Use these commands to configure SNMP settings. See
for more
information about SNMP.
52.1.1 Get Community Command
Syntax:
ras> sys snmp getcommunity <community>
where
Enter this command with the community to set the password.
52.1.2 Set Community Command
Syntax:
ras> sys snmp setcommunity <community>
where
Enter this command with the community to set the password.
52.1.3 Trusted Host Set Command
Syntax:
ras> sys snmp trustedhost <ip>
<community>
=
The password for the incoming
Get
- and
GetNext
- requests
from the management station.
<community>
=
The password for the incoming
Set
- requests from the
management station.