ZyXEL Communications IES-708-22A - Manual (Page 339)

Chapter 53 DSL Commands
IES-708-22A User’s Guide
339
An example is shown next.
In the list above, STUC refers to data detected by the STU-C, and STUR refers to data
detected by the STU-R. See
Table 96 on page 338 for an explanation of these counters.
These counters are also used in the alarm profiles (see Section 53.3 on page 340 ).
53.2.6 DSL Port 1 Day Performance Command
Syntax:
ras> statistics shdsl 1dayperf <portlist>
where
This command displays line performance statistics for the current and previous four days.
ras> statistics shdsl 15mperf 1 2
Port 1 Current 15 Min elapsed time: 605 secs (Link Down)
Current 15 Min PM: STUC STUR
ES: 0 0
SES: 0 0
CRC: 0 0
LOSWS: 0 0
UAS: 0 0
History 15 Min PM-1: STUC STUR
ES: 0 0
SES: 0 0
CRC: 0 0
LOSWS: 0 0
UAS: 0 0
History 15 Min PM-2: STUC STUR
ES: 0 0
SES: 0 0
CRC: 0 0
LOSWS: 0 0
UAS: 0 0
<portlist> = You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.