ZyXEL Communications IES-708-22A User Manual
Page 255
Chapter 42 Commands
IES-708-22A User’s Guide
255
igmpsnoop bandwidth
delete
<index>
(STUC mode only) Delete an
entry of bandwidth budget setting
specified in <index> field.
M/H
igmpsnoop bandwidth
port disable
<portlist>
(STUC mode only) Disable
bandwidth budget control for a
port
M/H
igmpsnoop bandwidth
port enable
<portlist>
(STUC mode only) Enable
bandwidth budget control for a
port
L/H
igmpsnoop bandwidth
port set
<portlist> <bandwidth>
(STUC mode only) Set bandwidth
threshold for a port
<bandwidth>: 1..100,000, in unit
of kbps
M/H
igmpsnoop bandwidth
port show
<portlist>
(STUC mode only) Show
bandwidth control setting for a
port
L/L
igmpsnoop bandwidth
set
<index> <start-mcast-ip>
<end-mcast-ip>
<bandwidth>
(STUC mode only) Set bandwidth
budget for a range of multicast IP
channels specified in <index>
field.
<index>: 1~96
<start-mcast-ip>: <ip>, start
multicast IP address
<end-mcast-ip>: <ip>, end
multicast IP address
M/H
igmpsnoop bandwidth
show
(STUC mode only) Show
bandwidth budget for a range of
multicast IP channels
L/L
igmpsnoop igmpcount
disable
<portlist>
(STUC mode only) Disable IGMP
count limiting to subscriber port
H/H
igmpsnoop igmpcount
enable
<portlist>
(STUC mode only) Enable IGMP
count limiting to subscriber port
H/H
igmpsnoop igmpcount
set
<portlist> <count>
(STUC mode only) Set IGMP
count limiting number to
subscriber port
H/H
igmpsnoop igmpcount
show
[portlist]
(STUC mode only) Display IGMP
count limiting setting status on the
specified slot
M/L
igmpsnoop mvlan set
<vid>
<portlist>:<F<T|U>|X>
[<portlist>:
<F<T|U>|X>...] [name]
(STUC mode only) Configures a
MVLAN entry.
H/H
igmpsnoop mvlan show
<vlanlist>
(STUC mode only) Show
multicast vlans,
Include group information
M/L
igmpsnoop mvlan
disable
<vid>
(STUC mode only) Turns off a
MVLAN entry.
H/H
igmpsnoop mvlan enable <vid>
(STUC mode only) Turns on a
MVLAN entry.
H/H
igmpsnoop mvlan delete
<vlanlist>
(STUC mode only) Removes a
MVLAN entry.
H/H
Table 89 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P